Issue 6, 2013

Imidazolium methanesulfonate as a high temperature proton conductor

Abstract

Imidazolium methanesulfonate (1) has been studied as a model proton conductor for high temperature polymer electrolyte membrane fuel cells (PEMFCs). It is found that 1 undergoes transformation from crystalline to plastic crystalline and then molten states successively from ambient temperature to 200 °C. The solid–solid phase transition of 1 at 174 °C has been preliminarily verified by differential scanning calorimetry (DSC) and temperature-dependent X-ray diffraction (XRD). At the melting point of 188 °C, 1 displays a low entropy of fusion of around 24 J mol−1 K−1. In particular, a high ionic conductivity of 1.0 × 10−2 S cm−1 is reached at 185 °C in the plastic phase. The activation energy for ionic conduction decreases as 1 is heated from the crystal phase to the melt phase. In the molten state, the contribution of protons to the ionic conductivity of 1 was corroborated electrochemically. In addition, 1 is electrochemically active for H2 oxidation and O2 reduction at a Pt electrode while it shows a high electrochemical window of 2.0 V. Furthermore, a Nafion® membrane has been successfully doped with 1, as identified by infrared spectroscopy, powder XRD, grazing incidence XRD and thermogravimetric analysis. To the best of our knowledge, this may be the first report on a protic organic ionic plastic crystal (OIPC) consisting of protonated imidazole (C3H5N2+) and an organic anion. The good thermal stability, high ionic conductivity, wide electrochemical window, favorable plastic crystal behavior and simple synthesis make 1 a highly interesting model proton conductor for high temperature PEMFCs.

Graphical abstract: Imidazolium methanesulfonate as a high temperature proton conductor

Supplementary files

Article information

Article type
Paper
Submitted
15 Oct 2012
Accepted
05 Dec 2012
First published
06 Dec 2012

J. Mater. Chem. A, 2013,1, 2238-2247

Imidazolium methanesulfonate as a high temperature proton conductor

J. Luo, O. Conrad and I. F. J. Vankelecom, J. Mater. Chem. A, 2013, 1, 2238 DOI: 10.1039/C2TA00713D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements