Issue 10, 2015

Probing the initiation of voltage decay in Li-rich layered cathode materials at the atomic scale

Abstract

Li-rich layered oxides hold great promise for improving the energy density of present-day Li-ion batteries. Their application is, however, limited by the voltage decay upon cycling, and the origin of such a phenomenon is poorly understood. A major issue is determining the voltage range over which detrimental reactions originate. In the present study, a unique yet effective approach was employed to probe this issue. Instead of studying the materials during the first cycle, electrochemical behavior and evolution of the atomic structures were compared in extensively cycled specimens under varied charge/discharge voltages. With the upper cutoff voltage lowered from 4.8 to 4.4 V, the voltage decay ceased to occur even after 60 cycles. In the meantime, the material maintained its layered structure without any spinel phase emerging at the surface, which is unambiguously shown by the atomic-resolution Z-contrast imaging and electron energy loss spectroscopy. These results have conclusively demonstrated that structural/chemical changes responsible for the voltage decay began between 4.4 and 4.8 V, where the layered-to-spinel transition was the most dramatic structural change observed. This discovery lays important groundwork for the mechanistic understanding of the voltage decay in Li-rich layered cathode materials.

Graphical abstract: Probing the initiation of voltage decay in Li-rich layered cathode materials at the atomic scale

Supplementary files

Article information

Article type
Paper
Submitted
12 Dec 2014
Accepted
21 Jan 2015
First published
21 Jan 2015

J. Mater. Chem. A, 2015,3, 5385-5391

Author version available

Probing the initiation of voltage decay in Li-rich layered cathode materials at the atomic scale

Y. Wu, C. Ma, J. Yang, Z. Li, L. F. Allard, C. Liang and M. Chi, J. Mater. Chem. A, 2015, 3, 5385 DOI: 10.1039/C4TA06856D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements