Issue 34, 2016, Issue in Progress

A novel approach to obtain conductive tracks on PP/MWCNT nanocomposites by laser printing

Abstract

This article aims to develop metal free conductive tracks on polymer nanocomposites based on a polypropylene matrix in the presence of MWCNTs, by using laser printing. The main purpose is to obtain electrical wiring that can replace the metal wires commonly used for electrical transmission. A complete investigation is carried out in order to study the effect of the laser processing on the polymer matrix and the influence of the MWCNTs on the electrical and thermal properties of the polymer-based nanocomposites. The paper also describes the effect of the laser on the final microstructure of the CNTs-based nanocomposites. The results obtained clearly indicate that the laser printing is a simple, flexible, and relatively low cost approach to obtain conductive tracks on PP in the presence of MWCNTs, depending on the laser parameters set up. In fact, as found, it is strictly necessary to reach a good compromise between the electrical resistance values and the final integrity of the samples, because the laser printing treatment can induce damage on the final material because of the high energy absorbed on the polymer surface and the high temperatures generated. A circuit prototype has been also designed and developed.

Graphical abstract: A novel approach to obtain conductive tracks on PP/MWCNT nanocomposites by laser printing

Supplementary files

Article information

Article type
Paper
Submitted
29 Jan 2016
Accepted
07 Mar 2016
First published
10 Mar 2016

RSC Adv., 2016,6, 28522-28531

A novel approach to obtain conductive tracks on PP/MWCNT nanocomposites by laser printing

G. Colucci, C. Beltrame, M. Giorcelli, A. Veca and C. Badini, RSC Adv., 2016, 6, 28522 DOI: 10.1039/C6RA02726A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements