Issue 8, 2017

Modeling human health characterization factors for indoor nanomaterial emissions in life cycle assessment: a case-study of titanium dioxide

Abstract

Life cycle assessment is used during the developmental stages of products and technologies. In the case of emerging technologies such as engineered nanomaterials there are limitations in using life cycle assessment to evaluate the direct environmental and human health impacts from emissions of nanomaterials themselves. This is due to the limited life cycle inventory data and life cycle impact assessment models currently available for describing the fate, exposure and effects of engineered nanomaterials in the environment. Specifically, current life cycle impact assessment methodologies do not include characterization factors for nanomaterials. Engineered nanomaterials may be emitted throughout the life cycle of a product, for example, in the occupational setting where there may be constant interaction between workers and large volumes of loose nano-powders. This paper presents a dynamic model that is intended for use in life cycle impact assessment methods to quantify the fate, exposure and human health effects of engineered nanomaterials. Using the case-study of nano-TiO2 emissions in the indoor workplace, nano-specific life cycle assessment characterization factors are presented. Compared to previously published steady-state models, the results of the current study demonstrate a much lower exposure potential, expressed as the ‘retained’-intake fraction of nano-TiO2 in the lung over the total emitted amount. Furthermore, the results indicate that smaller emissions lead to greater fractional deposition. Thus, an inverse relationship between the total indoor air emissions of nano-TiO2, and the resulting magnitude of the characterization factor was seen.

Graphical abstract: Modeling human health characterization factors for indoor nanomaterial emissions in life cycle assessment: a case-study of titanium dioxide

Supplementary files

Article information

Article type
Paper
Submitted
21 Mar 2017
Accepted
20 Jun 2017
First published
07 Jul 2017

Environ. Sci.: Nano, 2017,4, 1705-1721

Modeling human health characterization factors for indoor nanomaterial emissions in life cycle assessment: a case-study of titanium dioxide

M. P. Tsang, D. Li, K. L. Garner, A. A. Keller, S. Suh and G. W. Sonnemann, Environ. Sci.: Nano, 2017, 4, 1705 DOI: 10.1039/C7EN00251C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements