Issue 2, 2020

In situ TEM investigation of electron beam-induced ultrafast chemical lithiation for charging

Abstract

The enhancement of operational life and charging speed have been considered to be two of the major factors that will influence the development of energy storage devices in the future. Here, we utilized an electron beam (e-beam) to retrieve Li metal from LiF, the degradation product of LiPF6, and trigger the further lithiation of NiFe2O4/carbon nanotubes (CNTs) to relieve the degradation of the electrolyte and achieve ultrafast lithiation. Accordingly, in situ transmission electron microscopy (in situ TEM) was used to investigate the comprehensive mechanism of the whole process. The e-beam acting on the degradation product, i.e., LiF clusters, led to the generation of Li flakes, which served as the source for the subsequent lithiation. Then, with these Li flakes, the chemical lithiation of the NiFe2O4/CNTs was triggered, resulting in phase transformation to Ni and Fe nanograins. Compared to “electrochemical” lithiation, ultrahigh reaction speed and the ability to charge without a directly applied potential in the “chemical” lithiation are expected to extend lithiation to more diverse applications. As a result of this investigation, we have provided a new strategy for designing novel energy storage devices for the energy-harvesting field.

Graphical abstract: In situ TEM investigation of electron beam-induced ultrafast chemical lithiation for charging

Supplementary files

Article information

Article type
Paper
Submitted
10 Sep 2019
Accepted
24 Nov 2019
First published
25 Nov 2019

J. Mater. Chem. A, 2020,8, 648-655

In situ TEM investigation of electron beam-induced ultrafast chemical lithiation for charging

G. Huang, C. Huang, N. Kumar, C. Huang, T. Tseng and W. Wu, J. Mater. Chem. A, 2020, 8, 648 DOI: 10.1039/C9TA09988C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements