Issue 36, 2021

Silver vanadium bronze, β-Ag0.33V2O5: crystal-water-free high-capacity cathode material for rechargeable Ca-ion batteries

Abstract

Calcium-ion batteries (CIBs) are getting increasing attention as post-lithium-ion batteries owing to their theoretical and potential advantages in terms of energy density and cost-effectiveness. However, most of the reported cathode materials suffer from low capacity or cyclability in dried nonaqueous electrolytes. So far, all of the materials with high capacity (>100 mA h g−1) contain crystal water, which was considered to be crucial to the structural stability, enabling facile Ca diffusion. Here, we report β-Ag0.33V2O5 as a high-capacity cathode material for CIBs without crystal water. After the initial activation process, the material exhibited a capacity of 179 mA h g−1 at approximately 2.8 V (vs. Ca2+/Ca) in the ninth cycle and showed a modest cycling performance. The capacity is the highest among the Ca cathode materials without crystal water reported to date. We revealed that the activation process was caused by a replacement reaction between the silver and calcium ions. This material demonstrates that crystal water is not an essential component of CIB electrode materials for a high capacity, stimulating the ongoing research for developing higher-performance materials.

Graphical abstract: Silver vanadium bronze, β-Ag0.33V2O5: crystal-water-free high-capacity cathode material for rechargeable Ca-ion batteries

Supplementary files

Article information

Article type
Paper
Submitted
07 May 2021
Accepted
16 Aug 2021
First published
17 Aug 2021

J. Mater. Chem. A, 2021,9, 20776-20782

Silver vanadium bronze, β-Ag0.33V2O5: crystal-water-free high-capacity cathode material for rechargeable Ca-ion batteries

J. Hyoung, J. W. Heo, B. Jeon and S. Hong, J. Mater. Chem. A, 2021, 9, 20776 DOI: 10.1039/D1TA03881H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements