Issue 28, 2023

A narrow-bandgap photothermal material based on a donor–acceptor structure for the solar–thermal conversion application

Abstract

Organic photothermal materials can effectively convert solar energy into thermal energy in an environmentally friendly manner and have great potential for applications such as desalination and thermoelectric power generation. However, some organic photothermal materials have low photothermal conversion efficiency and a narrow range of solar absorption, limiting the improvement of photothermal performance. In this contribution, to achieve a lower energy gap and high photothermal conversion efficiency, a strong acceptor benzo[1,2-c:4,5-c′]bis([1,2,5]thiadiazole) (BBT) and the electron donor thiophene unit were introduced to synthesize a donor–acceptor (D–A) type organic conjugated molecule 4,8-bis(3-(2-ethylhexyl)-[2,2′-bithiophen]-5-yl)benzo[1,2-c:4,5-c′]bis([1,2,5]thiadiazole) (2TP-BBT). The atoms of C, N and S in BBT are essentially coplanar, attributed to the N atoms with higher electronegativity and C[double bond, length as m-dash]N groups with a lower-energy π-orbital, and benzothiadiazole exhibits strong electron-withdrawing properties. The 2TP-BBT solid shows a broad absorption spectrum ranging from 300 to 1400 nm. The 2TP-BBT solid has a high photothermal conversion efficiency of 22.38% under 1.0 kW m−2 simulated solar irradiation, and under laser irradiation at 980 nm, the solid photothermal conversion efficiency of the 2TP-BBT molecule reached 43.32%. Additionally, the 2TP-BBT/non-woven fabric is applied in solar-driven water evaporation with a water evaporation rate up to 1.35 kg m−2 h−1 under 1.0 kW m−2 simulated solar irradiation and a vapour conversion efficiency of 94.3%, which show superior water evaporation performance. The waste heat generated during solar water evaporation can be effectively used for synergistic thermoelectric power generation. This study demonstrates the application of photothermal D–A organic molecules in water purification and water–electric cogeneration application, therefore providing a valuable prospect of utilization in efficient solar thermal energy conversion.

Graphical abstract: A narrow-bandgap photothermal material based on a donor–acceptor structure for the solar–thermal conversion application

Supplementary files

Article information

Article type
Paper
Submitted
18 Apr 2023
Accepted
12 Jun 2023
First published
13 Jun 2023

J. Mater. Chem. A, 2023,11, 15380-15388

A narrow-bandgap photothermal material based on a donor–acceptor structure for the solar–thermal conversion application

R. Zhang, N. Jin, T. Jia, L. Wang, J. Liu, M. Nan, S. Qi, S. Liu and Y. Pan, J. Mater. Chem. A, 2023, 11, 15380 DOI: 10.1039/D3TA02301J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements