Issue 4, 2007

An impedimetric immunosensor for the detection of autoantibodies directed against gliadins

Abstract

An immunosensor has been developed for the detection of autoantibodies directed against wheat gliadin, a protein fraction of cereal gluten which is involved in celiac disease. The immunosensor is based on the immobilization of gliadins onto gold electrodes covered with a polyelectrolyte layer of poly(4-styrenesulfonic acid sodium salt). The immobilization was monitored by quartz crystal microbalance (QCM) analysis. The antigen–antibody interaction signal was amplified by an incubation step with peroxidase-labeled immunoglobulins and subsequent peroxidase-catalyzed oxidation of 3-amino-9-ethylcarbazole (AEC). Changes in the insulating properties of the electrode layer were measured by electrochemical impedance spectroscopy (EIS) in the presence of ferri/ferro-cyanide. Impedance spectra could be fitted to a Randles equivalent circuit with high accuracy. Exposing the sensor electrodes to various antigliadin antibody concentrations resulted in proportional changes in the charge transfer resistance. A calibration graph for the detection of antigliadin antibodies was established for antibody concentrations between 10−8 and 10−6 M. Finally, the sensor was used for the determination of antigliadin autoantibodies of the IgG and IgA type in several human sera.

Graphical abstract: An impedimetric immunosensor for the detection of autoantibodies directed against gliadins

Article information

Article type
Paper
Submitted
10 Jul 2006
Accepted
18 Jan 2007
First published
09 Feb 2007

Analyst, 2007,132, 314-322

An impedimetric immunosensor for the detection of autoantibodies directed against gliadins

T. Balkenhohl and F. Lisdat, Analyst, 2007, 132, 314 DOI: 10.1039/B609832K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements