Issue 8, 2009

Development of a new isotopically labeled internal standard for ergosterol measurement by GC/MS

Abstract

Environmental exposure to fungi has been associated with a variety of adverse health effects. Ergosterol, a marker of total fungal biomass, can be used to quantify exposure to fungi. Unfortunately, environmental ergosterol measurement using published GC/MS/MS methods is prone to bias introduced by sample matrix effects, resulting in potential measurement inaccuracy. We developed an isotopically labeled internal standard (13C ergosterol) for ergosterol quantification by GC/MS/MS, to eliminate bias due to sample matrix effects and selective losses during preparation. To produce 13C ergosterol, we grew Saccharomyces Cerevisiae on 13C D-glucose under aerobic conditions at room temperature. The 13C labeled ergosterol comprised 97.1% of the ergosterol in the dry yeast preparation. Ergosterol spike-recovery from house dust samples averaged 99.3% using the isotopically labeled yeast preparation as the internal standard (I.S.). By contrast, spike-recovery averaged 42.4% when 7-dehydrocholesterol (7-DHC) was the internal standard. Analysis of indoor house dust samples from a large epidemiologic study also showed the systematic underestimation of ergosterol when analyzed using 7-DHC as compared with using the yeast preparation containing the isotopically labeled authentic compound, 13C-ergosterol.

Graphical abstract: Development of a new isotopically labeled internal standard for ergosterol measurement by GC/MS

Article information

Article type
Paper
Submitted
28 Jan 2009
Accepted
19 May 2009
First published
12 Jun 2009

J. Environ. Monit., 2009,11, 1513-1517

Development of a new isotopically labeled internal standard for ergosterol measurement by GC/MS

J. Sordillo, D. Vespa, L. Haggerty, F. Youngs, D. Gold and D. Milton, J. Environ. Monit., 2009, 11, 1513 DOI: 10.1039/B901824G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements