Issue 34, 2010

Photoinduced bending behavior of crosslinked liquid-crystalline polymer films with a long spacer

Abstract

An acrylate monomer and diacrylate crosslinker containing a spacer of undecylene were synthesized and crosslinked liquid-crystalline polymer films with different crosslinking densities were prepared by photopolymerization of mixtures of the monomer and the crosslinker. Due to the relatively long spacer, distinct bending behavior was observed in the film with a low crosslinking density: when the temperature was lower than 90 °C, the film first bent away from the light source and then towards it upon the irradiation of UV light. As the temperature was raised above 90 °C, the film bent directly towards the light source. X-ray diffraction was used to probe the phase structures of the film at different temperatures and a plausible mechanism was presented to explain the distinct phenomenon. In addition, when the crosslinking density was increased, all the films bent directly towards the light source with faster speed, which is related to their modulus and order parameters.

Graphical abstract: Photoinduced bending behavior of crosslinked liquid-crystalline polymer films with a long spacer

Supplementary files

Article information

Article type
Paper
Submitted
25 Feb 2010
Accepted
01 Jun 2010
First published
23 Jul 2010

J. Mater. Chem., 2010,20, 7123-7130

Photoinduced bending behavior of crosslinked liquid-crystalline polymer films with a long spacer

Y. Zhang, J. Xu, F. Cheng, R. Yin, C. Yen and Y. Yu, J. Mater. Chem., 2010, 20, 7123 DOI: 10.1039/C0JM00510J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements