Issue 9, 2011

Separation of CO2 from air by temperature-vacuum swing adsorption using diamine-functionalized silica gel

Abstract

A temperature-vacuum swing (TVS) process, capable of extracting pure CO2 from dry and humid atmospheric air, is experimentally analyzed. Adsorption/desorption cycles utilizing a packed bed of a sorbent material made of diamine-functionalized commercial silica gel are performed under equilibrium and non-equilibrium (short-cycle) conditions. Thereby, the CO2 capture capacity of the material is determined over a wide range of operational parameters, namely 10–150 mbarabs desorption pressure, 74–90 °C desorption temperature, and 0–80% relative humidity during adsorption. Up to 158 ml of CO2 (6.8 ml per gram sorbent) with a purity of up to 97.6% is recovered per cycle. Adsorption isotherms of the sorbent material are experimentally determined by thermogravimetry and fitted to isotherm models, which are successfully applied to predict desorption capacities achieved in the TVS process. Under dry conditions, desorption pressures above 100 mbarabs lead to strongly decreasing CO2 capture capacities below 0.03 mmol g−1. Under humid conditions with 40% relative humidity during adsorption, the desorption pressure can be raised to 150 mbarabs with capture capacities remaining above 0.2 mmol g−1. Stable performance of the sorbent material in the TVS process is demonstrated over 40 consecutive adsorption/desorption cycles.

Graphical abstract: Separation of CO2 from air by temperature-vacuum swing adsorption using diamine-functionalized silica gel

Supplementary files

Article information

Article type
Paper
Submitted
09 May 2011
Accepted
27 Jun 2011
First published
01 Aug 2011

Energy Environ. Sci., 2011,4, 3584-3592

Separation of CO2 from air by temperature-vacuum swing adsorption using diamine-functionalized silica gel

J. A. Wurzbacher, C. Gebald and A. Steinfeld, Energy Environ. Sci., 2011, 4, 3584 DOI: 10.1039/C1EE01681D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements