Issue 19, 2012

Elastomer based tunable optofluidic devices

Abstract

The synergetic integration of photonics and microfluidics has enabled a wide range of optofluidic devices that can be tuned based on various physical mechanisms. One such tuning mechanism can be realized based on the elasticity of polydimethylsiloxane (PDMS). The mechanical tuning of these optofluidic devices was achieved by modifying the geometry of the device upon applying internal or external forces. External or internal forces can deform the elastomeric components that in turn can alter the optical properties of the device or directly induce flow. In this review, we discuss recent progress in tunable optofluidic devices, where tunability is enabled by the elasticity of the construction material. Different subtypes of such tuning methods will be summarized, namely tuning based on bulk or membrane deformations, and pneumatic actuation.

Graphical abstract: Elastomer based tunable optofluidic devices

Article information

Article type
Critical Review
Submitted
01 May 2012
Accepted
18 Jun 2012
First published
19 Jun 2012

Lab Chip, 2012,12, 3590-3597

Elastomer based tunable optofluidic devices

W. Song, A. E. Vasdekis and D. Psaltis, Lab Chip, 2012, 12, 3590 DOI: 10.1039/C2LC40481H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements