Issue 32, 2012

Single-component fuel cells fabricated by spark plasma sintering

Abstract

Porous single-component fuel cells, made up of a single layer of mixed ionic and electronic conductivity, have been fabricated using spark plasma sintering (SPS) and their performances were tested in methanol. It was possible to optimize the current/power output by changing the sintering conditions which directly influence the grain size, porosity, grain contacts and conducting paths for the fabricated cells.

Graphical abstract: Single-component fuel cells fabricated by spark plasma sintering

Supplementary files

Article information

Article type
Communication
Submitted
02 May 2012
Accepted
04 Oct 2012
First published
09 Oct 2012

RSC Adv., 2012,2, 12140-12143

Single-component fuel cells fabricated by spark plasma sintering

M. Stingaciu, B. Zhu, M. Singh and M. Johnsson, RSC Adv., 2012, 2, 12140 DOI: 10.1039/C2RA20829F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements