Issue 2, 2014

Controlled colloidal synthesis of iron pyrite FeS2 nanorods and quasi-cubic nanocrystal agglomerates

Abstract

Earth-abundant and nontoxic pyrite iron disulfide (FeS2) is very promising for photovoltaic applications but the phase purity and the morphology of iron pyrite nanocrystals (NCs) have a significant impact on the solar cell performance. In this work, we systematically investigated reaction conditions and the local chemical environment on the phase purity and morphology of iron pyrite NCs synthesized via the hot injection method. By using different solvents to dissolve iron and sulfur agents, varying reactant concentrations, and adding trioctylphosphine oxide (TOPO) or 1,2-hexadecanediol (Diol) into the reaction solution, iron pyrite short, branched and chromosome-like rods were obtained with a diameter of ∼10 nm and a length of ∼20–30 nm as well as quasi-cubic NC agglomerates with a size of ∼200 nm. Our experimental results show that the molar ratio of sulfur to iron and the reaction temperature are two critical factors in determining the crystalline phase of the synthesized materials. A mechanism involving the generation of H2S is proposed to explain the phase purity observed. The as-synthesized iron pyrite NCs can be dispersed well in chloroform, chlorobenzene, toluene, and hexane and thus are promising in solution-processable photovoltaic applications.

Graphical abstract: Controlled colloidal synthesis of iron pyrite FeS2 nanorods and quasi-cubic nanocrystal agglomerates

Article information

Article type
Paper
Submitted
17 Sep 2013
Accepted
05 Nov 2013
First published
08 Nov 2013

Nanoscale, 2014,6, 1029-1037

Controlled colloidal synthesis of iron pyrite FeS2 nanorods and quasi-cubic nanocrystal agglomerates

L. Zhu, B. J. Richardson and Q. Yu, Nanoscale, 2014, 6, 1029 DOI: 10.1039/C3NR04979E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements