Issue 6, 2014

Chemical characterisation and fabrication of chitosan–silica hybrid scaffolds with 3-glycidoxypropyl trimethoxysilane

Abstract

Chitosan has been explored as a potential component of biomaterials and scaffolds for many tissue engineering applications. Hybrid materials, where organic and inorganic networks interpenetrate at the molecular level, have been a particular focus of interest using 3-glycidoxypropyl trimethoxysilane (GPTMS) as a covalent crosslinker between the networks in a sol–gel process. GPTMS contains both an epoxide ring that can undergo a ring opening reaction with the primary amine of chitosan and a trimethoxysilane group that can co-condense with silica precursors to form a silica network. While many researchers have exploited this ring-opening reaction, it is not yet fully understood and thus the final product is still a matter of some dispute. Here, a detailed study of the reaction of GPTMS with chitosan under different pH conditions was carried out using a combination of solution state and solid state MAS NMR techniques. The reaction of GPTMS with chitosan at the primary amine to form a secondary amine was confirmed and the rate was found to increase at lower pH. However, a side-reaction was identified between GPTMS and water producing a diol species. The relative amounts of diol and chitosan–GPTMS species were 80 and 20% respectively and this ratio did not vary with pH. The functionalisation pH had an effect on the mechanical properties of 65 wt% organic monoliths where the properties of the organic component became more dominant. Scaffolds were fabricated by freeze drying and had pore diameters in excess of 140 μm, and tailorable by altering freezing temperature, which were suitable for tissue engineering applications. In both monoliths and scaffolds, increasing the organic content disrupted the inorganic network, leading to an increase in silica dissolution in SBF. However, the dissolution of silica and chitosan was congruent up to 4 weeks in SBF, illustrating the true hybrid nature resulting from covalent bonding between the networks.

Graphical abstract: Chemical characterisation and fabrication of chitosan–silica hybrid scaffolds with 3-glycidoxypropyl trimethoxysilane

Supplementary files

Additions and corrections

Article information

Article type
Paper
Submitted
25 Oct 2013
Accepted
02 Dec 2013
First published
03 Dec 2013

J. Mater. Chem. B, 2014,2, 668-680

Chemical characterisation and fabrication of chitosan–silica hybrid scaffolds with 3-glycidoxypropyl trimethoxysilane

L. S. Connell, F. Romer, M. Suárez, E. M. Valliant, Z. Zhang, P. D. Lee, M. E. Smith, J. V. Hanna and J. R. Jones, J. Mater. Chem. B, 2014, 2, 668 DOI: 10.1039/C3TB21507E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements