Issue 1, 2018

Carbon nanofibres-supported KCoMo catalysts for syngas conversion into higher alcohols

Abstract

The development of industrially-viable heterogeneous catalysts for higher alcohol (HA) synthesis via direct syngas conversion is hindered by the limited understanding of structural and electronic descriptors of their performance. Here, K-promoted CoMo(5 wt%)-based catalysts were investigated to shed light onto property–function relations. Evaluation of impregnated oxides and C-based materials identified a higher HA selectivity for the catalyst supported on carbon nanofibres obtained by the simultaneous addition of all metals. Using this carrier, additional solids were synthesised via ball milling as well as a sol–gel method with citric acid, which enhanced the CO conversion. After confirming the positive influence of K and a unitary Co/Mo ratio, the impact of temperature (573–773 K) and pressure (0.1–5 MPa) upon activation through reduction by hydrogen was investigated. A combination of two steps, one at 723 K and ambient pressure, fostering the HA selectivity (22%), and a second, more extended, at 573 K and 5 MPa, boosting the CO conversion (14%), maximised the space time yield of HA, which matches that of the best comparable CoMo system reported in the literature (ca. 0.12 gHA gcat−1 h−1) in spite of the 13-times lower metal loading. Characterisation by X-ray diffraction, temperature-programmed reduction by H2, X-ray photoelectron spectroscopy, operando infrared spectroscopy and electron microscopy uncovered that this originated from the atomic intermixing of Co and Mo in binary oxide phases and their high dispersion, enabling proximity and an effective reduction to low oxidation states of the metal sites (0 and +2 for Mo and 0 for Co) upon activation and reaction.

Graphical abstract: Carbon nanofibres-supported KCoMo catalysts for syngas conversion into higher alcohols

Supplementary files

Article information

Article type
Paper
Submitted
17 Sep 2017
Accepted
05 Nov 2017
First published
06 Nov 2017

Catal. Sci. Technol., 2018,8, 187-200

Carbon nanofibres-supported KCoMo catalysts for syngas conversion into higher alcohols

H. T. Luk, T. Forster, C. Mondelli, S. Siol, D. Curulla-Ferré, J. A. Stewart and J. Pérez-Ramírez, Catal. Sci. Technol., 2018, 8, 187 DOI: 10.1039/C7CY01908D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements