Issue 4, 2020

A simple field-based biodegradation test shows pH to be an inadequately controlled parameter in laboratory biodegradation testing

Abstract

Biodegradation tests are essential for characterizing the behavior of organic micropollutants in the environment, but they are carried out almost exclusively in the laboratory. Test parameters such as temperature and test chemical concentration are often applied in ways that affect observed biodegradation, and laboratory testing requires sophisticated temperature-controlled facilities. We developed a field-based test based on OECD 309 which minimizes the need for laboratory resources such as temperature-controlled facilities by using bottles incubated in the natural water body. The test also utilized contaminant residues present in unspiked natural water to increase the relevance of the results to the local system. A test in a local river and a matching lab-based test were conducted in parallel. We quantified 26 of 40 targeted micropollutants and observed dissipation for 13. Significant differences in half-life (up to a factor of 3.5) between lab and field bottles were observed for 7 compounds, with 6 of 7 degrading more slowly in field bottles. For 4 of these, dissipation was positively correlated to the neutral fraction of the chemical. Differences in the neutral fraction arose due to a higher pH in the lab bottles induced by outgassing of CO2 from the oversaturated river water. We conclude that pH is an important parameter to control in biodegradation testing and that field-based tests may be more environmentally relevant.

Graphical abstract: A simple field-based biodegradation test shows pH to be an inadequately controlled parameter in laboratory biodegradation testing

Supplementary files

Article information

Article type
Paper
Submitted
27 Oct 2019
Accepted
10 Feb 2020
First published
13 Feb 2020
This article is Open Access
Creative Commons BY license

Environ. Sci.: Processes Impacts, 2020,22, 1006-1013

A simple field-based biodegradation test shows pH to be an inadequately controlled parameter in laboratory biodegradation testing

M. Goss, Z. Li and M. S. McLachlan, Environ. Sci.: Processes Impacts, 2020, 22, 1006 DOI: 10.1039/C9EM00491B

This article is licensed under a Creative Commons Attribution 3.0 Unported Licence. You can use material from this article in other publications without requesting further permissions from the RSC, provided that the correct acknowledgement is given.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements