Issue 5, 2011

Development and validation of an analytical method for hydrocarbon residues using gas chromatography-mass spectrometry

Abstract

This work outlines the development of a gas chromatographic mass spectrometric (GCMS) method for the analysis of hydrocarbon residues such as those encountered in the examination of fire debris. The work compares favourably against an existing ASTM E-1618-06 method for ignitable liquid analysis currently used for the development of the National Centre for Forensic Science (NCFS) ignitable liquid database. A test mixture comprising fourteen hydrocarbons as recommended by the ASTM-1618-06 method was used to evaluate and validate the separation conditions together with a matrix matched ignitable liquid mixture diluted to 2 µL mL−1 in dichloromethane. Optimised conditions were as follows: injection volume of 1 µL with split ratio 50 to 1 at inlet temperature 280 °C, carrier gas flow rate was set as 1.0 mL min−1, the column temperature was maintained at 40 °C for 3 minutes, then increased at a rate of 12.5 °C min−1 to 290 °C, and held for 4 minutes. Undiluted ignitable liquid samples (50% gasoline : diesel) were also analysed with a high split ratio (300 : 1) and low injection volume (0.2 µL) to avoid column overloading and to eliminate any difficulties associated with solvent masking. This method provided improved separation and sensitivity compared to the ASTM method. Excellent precision both intra-day and inter-day (<3% RSD for peak area) was also obtained. The stability of ignitable liquid storage was also investigated over a two week period for various types of vials and septa.

Graphical abstract: Development and validation of an analytical method for hydrocarbon residues using gas chromatography-mass spectrometry

Article information

Article type
Paper
Submitted
19 Nov 2010
Accepted
01 Mar 2011
First published
29 Mar 2011

Anal. Methods, 2011,3, 1136-1142

Development and validation of an analytical method for hydrocarbon residues using gas chromatography-mass spectrometry

A. Choodum and N. N. Daeid, Anal. Methods, 2011, 3, 1136 DOI: 10.1039/C0AY00702A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements