Issue 10, 2011

Vertical ZnO nanowires/graphene hybrids for transparent and flexible field emission

Abstract

We present a transparent and flexible optoelectronic material composed of vertically aligned ZnO NWs grown on reduced graphene/PDMS substrates. Large-area reduced graphene films were prepared on PDMS substrates by chemical exfoliation from natural graphitevia oxidative aqueous dispersion and subsequent thermal reduction. ZnO NWs were hydrothermally grown on the reduced graphene film substrate and maintained their structural uniformity even in highly deformed states. The electrical contact between semiconducting ZnO NWs and the metallic graphene film was straightforwardly measured by electric force microscopy (EFM). It shows a typical metal–semiconductor ohmic contact without a contact barrier. Owing to the mechanical flexibility, transparency, and low contact barrier, the ZnO NWs/graphene hybrids show excellent field emission properties. Low turn-on field values of 2.0 V μm−1, 2.4 V μm−1, and 2.8 V μm−1 were measured for convex, flat, and concave deformations, respectively. Such variation of field emission properties were attributed to the modification of ZnO NWs emitter density upon mechanical deformation.

Graphical abstract: Vertical ZnO nanowires/graphene hybrids for transparent and flexible field emission

Supplementary files

Article information

Article type
Paper
Submitted
18 May 2010
Accepted
10 Jun 2010
First published
02 Aug 2010

J. Mater. Chem., 2011,21, 3432-3437

Vertical ZnO nanowires/graphene hybrids for transparent and flexible field emission

J. O. Hwang, D. H. Lee, J. Y. Kim, T. H. Han, B. H. Kim, M. Park, K. No and S. O. Kim, J. Mater. Chem., 2011, 21, 3432 DOI: 10.1039/C0JM01495H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements