Issue 9, 2011

Roles of thermally-induced vertical phase segregation and crystallization on the photovoltaic performance of bulk heterojunction inverted polymer solar cells

Abstract

Brief 160 °C annealing treatments dramatically enhanced the performance of bulk heterojunction inverted polymer solar cells with an ITO/ZnO/P3HT:PCBM/MoO3/Ag structure. The influence of such treatments on cell performance has been correlated to vertical phase segregation and crystallization within the photoactive layer of such cells. The photoactive layer, comprised of a mixture of P3HT and PCBM deposited on ZnO, was annealed for 10–30 min at 160 °C. Depth profiling with X-ray photoelectron spectroscopy (XPS) revealed that such annealing resulted in enrichment of the P3HT concentration near the ZnO layer, particularly after 20 and 30 min of annealing. Crystallization of P3HT was detected by X-ray diffraction (XRD) analyses after 10 to 30 min of such annealing, with little difference in the extent of crystallization detected over this time frame. It was found that vertical segregation does not seem to play a role as significant as that of crystallization on cell performance.

Graphical abstract: Roles of thermally-induced vertical phase segregation and crystallization on the photovoltaic performance of bulk heterojunction inverted polymer solar cells

  • This article is part of the themed collection: Solar energy

Article information

Article type
Paper
Submitted
18 Mar 2011
Accepted
10 Jun 2011
First published
08 Jul 2011

Energy Environ. Sci., 2011,4, 3456-3460

Roles of thermally-induced vertical phase segregation and crystallization on the photovoltaic performance of bulk heterojunction inverted polymer solar cells

H. Cheun, J. D. Berrigan, Y. Zhou, M. Fenoll, J. Shim, C. Fuentes-Hernandez, K. H. Sandhage and B. Kippelen, Energy Environ. Sci., 2011, 4, 3456 DOI: 10.1039/C1EE01316E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements