Issue 10, 2011

Fluorescent carbazole dendrimers for the detection of explosives

Abstract

Three generations of fluorescent carbazole dendrimers with spirobifluorene cores are studied as model chemosensor systems for the detection of nitroaromatic explosives via fluorescence quenching. Stern–Volmer measurements in solution with a series of nitrated analytes including the 2,4,6-trinitrotoluene (TNT) byproduct 2,4-dinitrotoluene (DNT) and the plastic explosives taggant 2,3-dimethyl-2,3-dinitrobutane (DMNB) showed an increase in affinity and hence quenching efficiency between the first and second generation dendrimers. In spite of the differences in the solution Stern–Volmer constants the solid state quenching response to the analytes was found to be independent of generation with the exception of 1,4-dinitrobenzene (DNB), where the quenching decreases with increasing generation. It was found that it was necessary to heat the films to release the analytes with the temperature required dependent on the analyte and/or dendrimer generation. These two results show that a simple solution Stern–Volmer analysis is not always sufficient for qualifying film sensing performance and that the drive to develop sensing materials with high solution Stern–Volmer constants for real applications needs to be reconsidered.

Graphical abstract: Fluorescent carbazole dendrimers for the detection of explosives

Article information

Article type
Paper
Submitted
16 May 2011
Accepted
15 Jun 2011
First published
04 Aug 2011

Polym. Chem., 2011,2, 2360-2368

Fluorescent carbazole dendrimers for the detection of explosives

G. Tang, S. S. Y. Chen, P. E. Shaw, K. Hegedus, X. Wang, P. L. Burn and P. Meredith, Polym. Chem., 2011, 2, 2360 DOI: 10.1039/C1PY00222H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements