Issue 12, 2013

Damping of the acoustic vibrations of a suspended gold nanowire in air and water environments

Abstract

The lifetimes of the acoustic vibrations of metal nanostructures depend sensitively on the properties of the environment, such as the acoustic impedance and viscosity. In order to accurately study these effects, they have to be separated from the damping processes that are inherent to the nanostructure. Here we show that this can be done experimentally by investigating individual gold nanowires suspended over a trench in air and liquid environments. The experiments were done by ultrafast pump-probe microscopy, recording transient absorption traces at the same point on the nanowire in both environments. These first experiments were performed with water, and the measured vibrational quality factors due to the presence of water were compared to continuum mechanics calculations for a cylinder in a homogeneous environment. Good agreement was found between the experimental quality factors and the calculated values. The continuum mechanics analysis shows that damping is dominated by the acoustic impedance of the solvent rather than by its viscosity for the nanowires in the present experiments. This experimental technique opens up the possibility of studying the effect of viscosity on the high frequency vibrational motions of nanostructures for a variety of liquids.

Graphical abstract: Damping of the acoustic vibrations of a suspended gold nanowire in air and water environments

Supplementary files

Article information

Article type
Paper
Submitted
21 Sep 2012
Accepted
13 Nov 2012
First published
14 Nov 2012

Phys. Chem. Chem. Phys., 2013,15, 4169-4176

Damping of the acoustic vibrations of a suspended gold nanowire in air and water environments

T. A. Major, A. Crut, B. Gao, S. S. Lo, N. D. Fatti, F. Vallée and G. V. Hartland, Phys. Chem. Chem. Phys., 2013, 15, 4169 DOI: 10.1039/C2CP43330C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements