Issue 10, 2012

An improved analytical performance of magnetically boosted radiofrequency glow discharge

Abstract

A magnetically boosted radiofrequency glow discharge optical emission spectroscopy (rf-GD-OES) system has been evaluated using an electromagnet setup that allows the application of transverse magnetic fields up to 70 mT. Such a configuration provides a magnetic field that is independent of the sample thickness. In particular, Cu emission lines, with different upper energy levels, are investigated using GD analysis of a pure copper sample. It is observed that their emission signals are significantly increased when applying magnetic field intensities above a threshold value (∼30 mT). Moreover, it is noticed that the GD pressure conditions as well as the upper energy levels of emission lines are the dominant parameters affecting the enhancement factor of the magnetically boosted Cu emission signals. On the other hand, aluminum matrix samples, with different copper mass contents, have been analyzed using the rf-GD-OES system, both in the normal mode and in the magnetically boosted mode. Linear calibration curves are obtained in both cases, but the slope of the calibration curves (sensitivity) is almost an order of magnitude higher when using the magnetic field. Furthermore, background levels and background noise are not affected by the presence of the external magnetic field; therefore, limits of detection are significantly improved.

Graphical abstract: An improved analytical performance of magnetically boosted radiofrequency glow discharge

Article information

Article type
Paper
Submitted
29 Mar 2012
Accepted
16 May 2012
First published
16 May 2012

J. Anal. At. Spectrom., 2012,27, 1658-1666

An improved analytical performance of magnetically boosted radiofrequency glow discharge

P. Vega, R. Valledor, J. Pisonero and N. Bordel, J. Anal. At. Spectrom., 2012, 27, 1658 DOI: 10.1039/C2JA30106G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements