Issue 9, 2012

In situ collection of volatile silver species in a new modular quartz tube atomizer for atomic absorption spectrometry

Abstract

Collection of volatile Ag species on a quartz surface has been successfully achieved for the first time, improving substantially the analytical performance of a previously reported on-line atomization procedure. Ag volatile species were formed during the reaction with tetrahydroborate in the presence of chemical modifiers (Triton X-100 and Antifoam B) in a special generator, collected and atomized in a quartz tube atomizer and detected by atomic absorption spectrometry. A novel modular design of the quartz tube atomizer was employed to allow trapping of volatile Ag species inside the optical tube heated to 1000 °C in excess of O2 over H2. Fast revolatilization and atomization of Ag species were subsequently realized by the change of the gas composition to H2 excess over O2. Collection efficiency under optimized conditions reached 94.1 ± 3.2%. The limit of detection was 0.11 ng ml−1 for a 250 μl sample, nine times better than in the on-line atomization mode. Precision expressed as the relative standard deviation of measured trapping peak areas was 3% at the 4 ng ml−1 level. The method was tested using water reference materials. The present shortcomings of this approach such as quartz devitrification at the collection area are discussed and feasible solutions are suggested.

Graphical abstract: In situ collection of volatile silver species in a new modular quartz tube atomizer for atomic absorption spectrometry

Supplementary files

Article information

Article type
Paper
Submitted
06 Apr 2012
Accepted
14 May 2012
First published
15 May 2012

J. Anal. At. Spectrom., 2012,27, 1382-1390

In situ collection of volatile silver species in a new modular quartz tube atomizer for atomic absorption spectrometry

S. Musil, J. Kratzer, M. Vobecký and T. Matoušek, J. Anal. At. Spectrom., 2012, 27, 1382 DOI: 10.1039/C2JA30112A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements