Issue 9, 2012

Automated microfluidic platform for studies of carbon dioxide dissolution and solubility in physical solvents

Abstract

We present an automated microfluidic (MF) approach for the systematic and rapid investigation of carbon dioxide (CO2) mass transfer and solubility in physical solvents. Uniformly sized bubbles of CO2 with lengths exceeding the width of the microchannel (plugs) were isothermally generated in a co-flowing physical solvent within a gas-impermeable, silicon-based MF platform that is compatible with a wide range of solvents, temperatures and pressures. We dynamically determined the volume reduction of the plugs from images that were accommodated within a single field of view, six different downstream locations of the microchannel at any given flow condition. Evaluating plug sizes in real time allowed our automated strategy to suitably select inlet pressures and solvent flow rates such that otherwise dynamically self-selecting parameters (e.g., the plug size, the solvent segment size, and the plug velocity) could be either kept constant or systematically altered. Specifically, if a constant slug length was imposed, the volumetric dissolution rate of CO2 could be deduced from the measured rate of plug shrinkage. The solubility of CO2 in the physical solvent was obtained from a comparison between the terminal and the initial plug sizes. Solubility data were acquired every 5 min and were within 2–5% accuracy as compared to literature data. A parameter space consisting of the plug length, solvent slug length and plug velocity at the microchannel inlet was established for different CO2solvent pairs with high and low gas solubilities. In a case study, we selected the gas–liquid pair CO2–dimethyl carbonate (DMC) and volumetric mass transfer coefficients 4–30 s−1 (translating into mass transfer times between 0.25 s and 0.03 s), and Henry's constants, within the range of 6–12 MPa.

Graphical abstract: Automated microfluidic platform for studies of carbon dioxide dissolution and solubility in physical solvents

Supplementary files

Article information

Article type
Paper
Submitted
28 Oct 2011
Accepted
19 Jan 2012
First published
14 Mar 2012

Lab Chip, 2012,12, 1611-1618

Automated microfluidic platform for studies of carbon dioxide dissolution and solubility in physical solvents

M. Abolhasani, M. Singh, E. Kumacheva and A. Günther, Lab Chip, 2012, 12, 1611 DOI: 10.1039/C2LC21043F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements