Issue 18, 2013

Flow switching in microfluidic networks using passive features and frequency tuning

Abstract

Manipulating fluids in microchips remains a persistent challenge in the development of inexpensive and portable point-of-care diagnostic tools. Flow in microfluidic chips can be controlled via frequency tuning, wherein the excitation frequency of a pressure source is matched with the characteristic frequencies of network branches. The characteristic frequencies of each branch arise from coupling between fluid in the channels and passive deformable features, and can be programmed by adjusting the dimensions and stiffness of the features. In contrast to quasi-static ‘on–off’ valves, such networks require only a single active element and relatively small dynamic displacements. To achieve effective flow switching between different pathways in the chip, well-separated peak frequencies and narrow bandwidths are required (such that branches are independently addressable). This paper illustrates that high selectivity can be achieved in fluidic networks that exploit fluidic inertia, with flow driven selectively at peak frequencies between ∼1–100 Hz with bandwidths less than ∼25% of the peak frequency. Precise frequency-based flow switching between two on-chip microchannels is demonstrated. A simple theoretical framework is presented that predicts the characteristic frequencies in terms of feature properties, thus facilitating the design of networks with specific activation frequencies. The approach provides a clear pathway to simplification and miniaturization of flow-control hardware for microchips with several fluidic domains.

Graphical abstract: Flow switching in microfluidic networks using passive features and frequency tuning

Supplementary files

Article information

Article type
Paper
Submitted
17 Apr 2013
Accepted
25 Jun 2013
First published
26 Jun 2013

Lab Chip, 2013,13, 3668-3674

Flow switching in microfluidic networks using passive features and frequency tuning

R. R. Collino, N. Reilly-Shapiro, B. Foresman, K. Xu, M. Utz, J. P. Landers and M. R. Begley, Lab Chip, 2013, 13, 3668 DOI: 10.1039/C3LC50481F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements