Issue 22, 2016
From the journal:

CrystEngComm

Fabrication and absorption properties based on ZnO nanocomposites adjusted by length–diameter ratio of ZnO nanorods†

Qiong Wu,ab   Yu Si,ab   Ying-Ying Wu,ab   Shan-Wen Wang,ab   Guang-Sheng Wang*ab  and  Lei Wang*c  

* Corresponding authors

a State Key Laboratory of Virtual Reality Technology and Systems, School of Mechanical Engineering and Automation, Beihang University, Beijing 100191, PR China
E-mail: wanggsh@buaa.edu.cn

b Key Laboratory of Bio-Inspired Smart Interfacial Science and Technology of Ministry of Education, School of Chemistry and Environment, Beihang University, Beijing 100191, PR China

c Beijing Institute of Technology, Zhuhai, Guangdong Province, People's Republic of China
E-mail: 83840428@qq.com

Abstract

A series of ZnO nanorods (NR) with different length to diameters have been synthesized. The absorption properties of ZnO-NR/PVDF composites were investigated based on the same filler content. The results indicated that the ZnO-NR3/PVDF composites with a filler loading of 20 wt% showed the best absorption properties with two sharp peaks of −18.90 dB at 13.80 GHz and −6.8 dB at 7.2 GHz; the relationship between the ratio of length to diameter and the absorption properties were also studied.

Graphical abstract: Fabrication and absorption properties based on ZnO nanocomposites adjusted by length–diameter ratio of ZnO nanorods

About
Cited by
Related
Download options Please wait...

Supplementary files

Article information

DOI
https://doi.org/10.1039/C5CE02498F
Article type
Paper
Submitted
20 Dec 2015
Accepted
15 Jan 2016
First published
18 Jan 2016

CrystEngComm, 2016,18, 4027-4031

Permissions

Request permissions

Fabrication and absorption properties based on ZnO nanocomposites adjusted by length–diameter ratio of ZnO nanorods

Q. Wu, Y. Si, Y. Wu, S. Wang, G. Wang and L. Wang, CrystEngComm, 2016, 18, 4027 DOI: 10.1039/C5CE02498F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements