Issue 8, 2016

EDTA-treated cotton-thread microfluidic device used for one-step whole blood plasma separation and assay

Abstract

This study aims to observe the wicking and separation characteristics of blood plasma in a cotton thread matrix functioning as a microfluidic thread-based analytical device (μTAD). We investigated several cotton thread treatment methods using ethylenediaminetetraacetic acid (EDTA) anticoagulant solution for wicking whole blood samples and separating its plasma. The blood of healthy Indonesian thin tailed sheep was used in this study to understand the properties of horizontal wicking and separation on the EDTA-treated μTAD. The wicking distance and blood cell separation from its plasma was observed for 120 s and documented using a digital phone camera. The results show that untreated cotton-threads stopped the blood wicking process on the μTAD. On the other hand, the deposition of EDTA anticoagulant followed by its drying on the thread at room temperature for 10 s provides the longest blood wicking with gradual blood plasma separation. Furthermore, the best results in terms of the longest wicking and the clearest on-thread separation boundary between blood cells and its plasma were obtained using the μTAD treated with EDTA deposition followed by 60 min drying at refrigerated temperature (2–8 °C). The separation length of blood plasma in the μTADs treated with dried-EDTA at both room and refrigerated temperatures was not statistically different (P > 0.05). This separation occurs through the synergy of three factors, cotton fiber, EDTA anticoagulant and blood platelets, which induce the formation of a fibrin-filter via a partial coagulation process in the EDTA-treated μTAD. An albumin assay was employed to demonstrate the efficiency of this plasma separation method during a one-step assay on the μTAD. Albumin in blood is an important biomarker for kidney and heart disease. The μTAD has a slightly better limit of detection (LOD) than conventional blood analysis, with an LOD of 114 mg L−1 compared to 133 mg L−1, respectively. However, the μTAD performed faster to get results after 3 min compared to 14 min for centrifuged analysis of sheep blood samples. In conclusion, on-thread dried-EDTA anticoagulant deposition was able to increase the wicking distance and has a better capability to separate blood plasma and is suitable for combining separation and the assay system in a single device.

Graphical abstract: EDTA-treated cotton-thread microfluidic device used for one-step whole blood plasma separation and assay

Supplementary files

Article information

Article type
Paper
Submitted
05 Feb 2016
Accepted
10 Mar 2016
First published
10 Mar 2016

Lab Chip, 2016,16, 1492-1504

EDTA-treated cotton-thread microfluidic device used for one-step whole blood plasma separation and assay

M. F. Ulum, L. Maylina, D. Noviana and D. H. B. Wicaksono, Lab Chip, 2016, 16, 1492 DOI: 10.1039/C6LC00175K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements