Issue 9, 2011

A review on non-precious metal electrocatalysts for PEMfuelcells

Abstract

With the approaching commercialization of PEM fuel cell technology, developing active, inexpensive non-precious metal ORR catalyst materials to replace currently used Pt-based catalysts is a necessary and essential requirement in order to reduce the overall system cost. This review paper highlights the progress made over the past 40 years with a detailed discussion of recent works in the area of non-precious metal electrocatalysts for oxygen reduction reaction, a necessary reaction at the PEM fuel cell cathode. Several important kinds of unsupported or carbon supported non-precious metal electrocatalysts for ORR are reviewed, including non-pyrolyzed and pyrolyzed transition metal nitrogen-containing complexes, conductive polymer-based catalysts, transition metal chalcogenides, metal oxides/carbides/nitrides/oxynitrides/carbonitrides, and enzymatic compounds. Among these candidates, pyrolyzed transition metal nitrogen-containing complexes supported on carbon materials (M–Nx/C) are considered the most promising ORR catalysts because they have demonstrated some ORR activity and stability close to that of commercially available Pt/C catalysts. Although great progress has been achieved in this area of research and development, there are still some challenges in both their ORR activity and stability. Regarding the ORR activity, the actual volumetric activity of the most active non-precious metal catalyst is still well below the DOE 2015 target. Regarding the ORR stability, stability tests are generally run at low current densities or low power levels, and the lifetime is far shorter than targets set by DOE. Therefore, improving both the ORR activity and stability are the major short and long term focuses of non-precious metal catalyst research and development. Based on the results achieved in this area, several future research directions are also proposed and discussed in this paper.

Graphical abstract: A review on non-precious metal electrocatalysts for PEM fuel cells

Article information

Article type
Review Article
Submitted
13 Oct 2010
Accepted
26 May 2011
First published
14 Jul 2011

Energy Environ. Sci., 2011,4, 3167-3192

A review on non-precious metal electrocatalysts for PEM fuel cells

Z. Chen, D. Higgins, A. Yu, L. Zhang and J. Zhang, Energy Environ. Sci., 2011, 4, 3167 DOI: 10.1039/C0EE00558D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements