Issue 8, 2014

A microfluidic photobioreactor array demonstrating high-throughput screening for microalgal oil production

Abstract

Microalgae are envisioned as a future source of renewable oil. The feasibility of producing high-value biomolecules from microalgae is strongly dependent on developing strains with increased productivity and environmental tolerance, understanding algal gene regulation, and optimizing growth conditions for higher production of target molecules. We present a high-throughput microfluidic microalgal photobioreactor array capable of applying 64 different light conditions to arrays of microscale algal photobioreactors and apply this device to investigate how light conditions influence algal growth and oil production. Using the green colony-forming microalga Botryococcus braunii, the light intensity and light–dark cycle conditions were identified that induced 1.8-fold higher oil accumulation over the typically used culture conditions. Additionally, the studies revealed that the condition under which maximum oil production occurs is significantly different from that of maximum growth. This screening test was accomplished using the developed photobioreactor array at 250 times higher throughput compared to conventional flask-scale photobioreactors.

Graphical abstract: A microfluidic photobioreactor array demonstrating high-throughput screening for microalgal oil production

Supplementary files

Article information

Article type
Paper
Submitted
17 Dec 2013
Accepted
23 Jan 2014
First published
23 Jan 2014

Lab Chip, 2014,14, 1415-1425

A microfluidic photobioreactor array demonstrating high-throughput screening for microalgal oil production

H. S. Kim, T. L. Weiss, H. R. Thapa, T. P. Devarenne and A. Han, Lab Chip, 2014, 14, 1415 DOI: 10.1039/C3LC51396C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements