Issue 8, 1999

A critical assessment of laser ablation ICP-MS as an analytical tool for depth analysis in silica-based glass samples

Abstract

Laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) is a versatile technique for trace element analysis with respect to depth in solid samples. The high sensitivity of ICP-MS makes it possible to determine most elements in the periodic table at trace levels (<1 µg g –1 ). Recent trends in the development of instrumentation have led to the possibility of analysing craters of smaller diameter with variable depth. However, a major limitation to this approach for depth profiling, preventing accurate and precise analysis, is element-selective, non-reproducible ablation. The ability for representative sampling during depth analysis is tested in this study by ablating into homogeneous silica-based glass materials. Elemental relative response deviations of up to 300% are observed for selected elements during progressive ablation into the glass target. The geometry of the ablation crater controls the accuracy of sampling of the material at depth. Elemental fractionation becomes significant for some elements (e.g., Zn, Pb) when the depth/diameter ratio of the ablation crater is >6, corresponding to a 50% reduction in analyte response. Large diameter craters, if ablated with sufficient laser power density, reduce elemental fractionation and give a larger signal for a longer period of time, providing more suitable conditions for representative analysis. LA-ICP-MS can be a powerful technique for depth profiling provided that optimum analytical conditions are selected.

Article information

Article type
Paper

J. Anal. At. Spectrom., 1999,14, 1143-1153

A critical assessment of laser ablation ICP-MS as an analytical tool for depth analysis in silica-based glass samples

A. J. G. Mank and P. R. D. Mason, J. Anal. At. Spectrom., 1999, 14, 1143 DOI: 10.1039/A903304A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements