Issue 1, 2003

Microfluidic devices for fluidic circulation and mixing improve hybridization signal intensity on DNA arrays

Abstract

Reactions of biomolecules with surface mounted materials on microscope slides are often limited by slow diffusion kinetics, especially in low volumes where diffusion is the only means of mixing. This is a particular problem for reactions where only small amounts of analyte are available and the required reaction volume limits the analyte concentration. A low volume microfluidic device consisting of two interconnected 9 mm × 37.5 mm reaction chambers was developed to allow mixing and closed loop fluidic circulation over most of the surface of a microscope slide. Fluid samples are moved from one reaction chamber to the other by the rotation of a magnetic stirring bar that is driven by a standard magnetic stirrer. We demonstrate that circulation and mixing of different reagents can be efficiently accomplished by this closed loop device with solutions varying in viscosity from 1 to 16.2 centipoise. We also show by example of a microarray hybridization that the reaction efficiency can be enhanced 2–5 fold through fluid mixing under conditions where diffusion is rate limiting. For comparison, similar results were achieved with a disposable commercial device that covers only half of the reaction area of the closed loop device.

Article information

Article type
Paper
Submitted
18 Oct 2002
Accepted
19 Nov 2002
First published
16 Dec 2002

Lab Chip, 2003,3, 46-50

Microfluidic devices for fluidic circulation and mixing improve hybridization signal intensity on DNA arrays

P. K. Yuen, G. Li, Y. Bao and U. R. Müller, Lab Chip, 2003, 3, 46 DOI: 10.1039/B210274A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements