Issue 4, 2003

Catalyst performance in reforming of tar derived from biomass over noble metal catalysts

Abstract

An activity test in the reforming of tar derived from cedar biomass over M–CeO2–SiO2 (M = Rh, Pt, Pd, Ru, Ni) was carried out in a secondary fluidized catalyst bed at lower temperature range (823–923 K) than the conventional methods. We have measured the formation rate of CO, CO2, CH4, H2, and the yield of coke deposited on the catalyst surface and the yield of char accumulated in the primary bed. It was found that Rh–CeO2–SiO2 exhibited much higher performance than other metal catalysts in terms of the activity of tar reforming, and the yield of gas and coke.

Graphical abstract: Catalyst performance in reforming of tar derived from biomass over noble metal catalysts

Article information

Article type
Paper
Submitted
25 Mar 2003
First published
30 May 2003

Green Chem., 2003,5, 399-403

Catalyst performance in reforming of tar derived from biomass over noble metal catalysts

K. Tomishige, T. Miyazawa, M. Asadullah, S. Ito and K. Kunimori, Green Chem., 2003, 5, 399 DOI: 10.1039/B303371F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements