Issue 5, 2007

Tuning microchannel wettability and fabrication of multiple-step Laplace valves

Abstract

By using characteristics of titania nanoparticles, a patterning and tuning method of microchannel surface wettability was developed for microfluid control. Titania modification of a microchannel provided a nanometer-sized surface roughness and the subsequent hydrophobic treatment made the surface superhydrophobic. Photocatalytic decomposition of the coated hydrophobic molecules was used to pattern the surface wettability which was tuned in the range from superhydrophobic to superhydrophilic under controlled photoirradiation. Four-step wettability-based Laplace valves working as passive stop valves (6.8–12.5 kPa pressure barrier) were prepared by using the patterned and tuned surface. As a demonstration, a batch operation system consisting of two sub-nL dispensers and a reaction chamber was constructed. Fundamental liquid manipulations required for the batch operation were successfully conducted, including liquid measurement (390 and 770 pL), transportation, injection into the chamber, and retention in the chamber. To verify the quantitative operation, the system was applied to a fluorescence quenching experiment as an example of volumetric analyses. The present method provides flexible patterning in a wide range of tuned wettability surfaces in microchannels even after channel fabrication and it can be applied to various two- or multi-phase microfluidic systems.

Graphical abstract: Tuning microchannel wettability and fabrication of multiple-step Laplace valves

Supplementary files

Article information

Article type
Paper
Submitted
02 Jan 2007
Accepted
22 Mar 2007
First published
13 Apr 2007

Lab Chip, 2007,7, 596-602

Tuning microchannel wettability and fabrication of multiple-step Laplace valves

G. Takei, M. Nonogi, A. Hibara, T. Kitamori and H. Kim, Lab Chip, 2007, 7, 596 DOI: 10.1039/B618851F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements