Issue 6, 2008

Electrochemical impedance spectroscopy of mixed conductors under a chemical potential gradient: a case study of Pt|SDC|BSCF

Abstract

The AC impedance response of mixed ionic and electronic conductors (MIECs) exposed to a chemical potential gradient is derived from first principles. In such a system, the chemical potential gradient induces a gradient in the carrier concentration. For the particular system considered, 15% samarium doped ceria (SDC15) with Ba0.5Sr0.5Co0.8Fe0.2O3−δ (BSCF) and Pt electrodes, the oxygen vacancy concentration is a constant under the experimental conditions and it is the electron concentration that varies. The resulting equations are mapped to an equivalent circuit that bears some resemblance to recently discussed equivalent circuit models for MIECs under uniform chemical potential conditions, but differs in that active elements, specifically, voltage-controlled current sources, occur. It is shown that from a combination of open circuit voltage measurements and AC impedance spectroscopy, it is possible to use this model to determine the oxygen partial pressure drop that occurs between the gas phase in the electrode chambers and the electrode|electrolyte interface, as well as the interfacial polarization resistance. As discussed in detail, this resistance corresponds to the slope of the interfacial polarization curve. Measurements were carried out at temperatures between 550 and 650 °C and oxygen partial pressure at the Pt anode ranging from 10−29 to 10−24 atm (attained using H2/H2O/Ar mixtures), while the cathode was exposed to either synthetic air or neat oxygen. The oxygen partial pressure drop at the anode was typically about five orders of magnitude, whereas that at the cathode was about 0.1 atm for measurements using air. Accordingly, the poor activity of the anode is responsible for a loss in open circuit voltage of about 0.22 V, whereas the cathode is responsible for only about 0.01 V, reflecting the high activity of BSCF for oxygen electro-reduction. The interfacial polarization resistance at the anode displayed dependences on oxygen partial pressure and on temperature that mimic those of the electronic resistivity of SDC15. This behavior is consistent with hydrogen electro-oxidation occurring directly on the ceria surface and electron migration being the rate-limiting step. However, the equivalent resistance implied by the oxygen partial pressure drop across the anode displayed slightly different behavior, possibly indicative of a more complex reaction pathway.

Graphical abstract: Electrochemical impedance spectroscopy of mixed conductors under a chemical potential gradient: a case study of Pt|SDC|BSCF

Article information

Article type
Paper
Submitted
14 Aug 2007
Accepted
06 Nov 2007
First published
05 Dec 2007

Phys. Chem. Chem. Phys., 2008,10, 865-883

Electrochemical impedance spectroscopy of mixed conductors under a chemical potential gradient: a case study of Pt|SDC|BSCF

W. Lai and S. M. Haile, Phys. Chem. Chem. Phys., 2008, 10, 865 DOI: 10.1039/B712473B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements