Issue 35, 2010

Visible light photo-induced antibacterial activity of CNT–doped TiO2 thin films with various CNT contents

Abstract

Carbon nanotube (CNT)-doped TiO2 thin films with various CNT contents were synthesized by sol–gel method for visible light photoinactivation of Escherichia coli bacteria. Post annealing of the CNT–doped TiO2 thin films at 450 °C resulted in anatase TiO2 and formation of Ti–C and Ti–O–C carbonaceous bonds in the film. By increasing the CNT content, the thin films could further inactivate the bacteria in the dark. Meanwhile, as the CNT content increased from zero to 40 wt% the effective optical band gap energy of the CNT–doped TiO2 thin films annealed at 450 °C decreased from 3.2–3.3 to less than ∼2.8 eV providing light absorption in the visible region. Concerning this, visible light photoinactivation of the bacteria on the surface of the films was found to be optimum for 20 wt% CNT content. The CNT–doped TiO2 thin films annealed at 450 °C showed a further improved photoinactivation of bacteria than the films annealed at 100 °C. The improvement in the visible light photocatalytic performance was assigned to the charge transfer through the carbonaceous bonds formed between the TiO2 and the CNT content of the films annealed at 450 °C, in contrast to the thin films annealed at 100 °C which contained no such effective bonds.

Graphical abstract: Visible light photo-induced antibacterial activity of CNT–doped TiO2 thin films with various CNT contents

Article information

Article type
Paper
Submitted
27 Feb 2010
Accepted
08 Jun 2010
First published
30 Jul 2010

J. Mater. Chem., 2010,20, 7386-7392

Visible light photo-induced antibacterial activity of CNT–doped TiO2 thin films with various CNT contents

O. Akhavan, R. Azimirad, S. Safa and M. M. Larijani, J. Mater. Chem., 2010, 20, 7386 DOI: 10.1039/C0JM00543F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements