Issue 47, 2010

A novel electrode material based on a highly homogeneous polyaniline/titanium oxide hybrid for high-rate electrochemical capacitors

Abstract

A highly homogeneous polyaniline/titanium oxide hybrid, which contains approximately 75% polyaniline by mass, has been prepared by the oxidative polymerization of aniline with the simultaneous hydrolysis of Ti(SO4)2. As an electrode material for electrochemical capacitors, its initial specific capacitance is about 495 F g−1 within the potential window −0.2 to 0.7 V vs. SCE at a constant current density of 2.5 A g−1, and its capacitance retention ratio reaches circa 70% with the growth of current densities from 0.5 A g−1 to 30 A g−1. It is promising for high-rate electrochemical capacitive energy storage.

Graphical abstract: A novel electrode material based on a highly homogeneous polyaniline/titanium oxide hybrid for high-rate electrochemical capacitors

Supplementary files

Article information

Article type
Communication
Submitted
04 Oct 2010
Accepted
12 Oct 2010
First published
20 Oct 2010

J. Mater. Chem., 2010,20, 10598-10601

A novel electrode material based on a highly homogeneous polyaniline/titanium oxide hybrid for high-rate electrochemical capacitors

X. Li, H. Zhang, G. Wang and Z. Jiang, J. Mater. Chem., 2010, 20, 10598 DOI: 10.1039/C0JM03330H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements