Issue 2, 2012

Comparing spiro-OMeTAD and P3HT hole conductors in efficient solid state dye-sensitized solar cells

Abstract

Two hole conductor materials, spiro-OMeTAD and P3HT, were compared in solid-state dye-sensitized solar cells. Two organic dyes containing one anchor unit (D35) or two anchor units (M3) were used in the comparison. Absorbed photon to current conversion efficiency close to unity was obtained for the devices with spiro-OMeTAD. Energy conversion efficiencies of 4.7% and 4.9% were measured for the devices with spiro-OMeTAD and the dyes D35 and M3, respectively. For the devices using the P3HT hole conductor the results were rather different comparing the two dye molecules, with energy conversion efficiencies of 3.2% and 0.5% for D35 and M3, respectively. Photo-induced absorption measurements suggest that the regeneration of the dyes, and the polymer infiltration, is not complete using P3HT, while spiro-OMeTAD regenerates the dyes efficiently. However, the TiO2/D35/P3HT system shows rather high energy conversion efficiency and electrochemical oxidation of the dyes on TiO2 indicates that D35 have a more efficient dye to dye hole conduction than M3, which thereby might explain the higher performance. The dye hole conduction may therefore be of significant importance for optimizing the energy conversion in such hybrid TiO2/dye/polymer systems.

Graphical abstract: Comparing spiro-OMeTAD and P3HT hole conductors in efficient solid state dye-sensitized solar cells

Supplementary files

Article information

Article type
Paper
Submitted
23 Sep 2011
Accepted
01 Nov 2011
First published
25 Nov 2011

Phys. Chem. Chem. Phys., 2012,14, 779-789

Comparing spiro-OMeTAD and P3HT hole conductors in efficient solid state dye-sensitized solar cells

L. Yang, U. B. Cappel, E. L. Unger, M. Karlsson, K. M. Karlsson, E. Gabrielsson, L. Sun, G. Boschloo, A. Hagfeldt and E. M. J. Johansson, Phys. Chem. Chem. Phys., 2012, 14, 779 DOI: 10.1039/C1CP23031J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements