Issue 5, 2012

Porous organic–inorganic hybrid aerogels based on Cr3+/Fe3+ and rigid bridging carboxylates

Abstract

A general method to prepare organic–inorganic hybrid aerogels has been presented. A series of organic–inorganic hybrid aerogels were successfully produced from 3d trivalent transition metals (Cr3+, Fe3+) and bridging carboxylic acids. Gelation of the Cr(III) gels was achieved by heating the precursor solution to temperatures above 80 °C, which is in sharp contrast to usual supramolecular gels. Among a range of ligands used, highly porous aerogels could be prepared from rigid carboxylate, e.g.1,4-benzenedicarboxylate and 1,3,5-benzenetricarboxylate. The porous aerogels can be described as a coherent, rigid spongy network of continuous nanometre-sized particles, which is significantly different from the usual fibrous network of supramolecular gels. The aerogels have tunable porous structures with micro- and mesoporosity depending on their reactant concentrations. Their surface areas, pore volumes, and average pore sizes were analysed by using nitrogen sorption, and the accessibility of the pores to bulky molecules was also evaluated. It represents a strategy to prepare hybrid materials with large porosity utilising structurally simple building blocks as precursors.

Graphical abstract: Porous organic–inorganic hybrid aerogels based on Cr3+/Fe3+ and rigid bridging carboxylates

Supplementary files

Article information

Article type
Paper
Submitted
17 Sep 2011
Accepted
26 Oct 2011
First published
05 Dec 2011

J. Mater. Chem., 2012,22, 1862-1867

Porous organic–inorganic hybrid aerogels based on Cr3+/Fe3+ and rigid bridging carboxylates

S. Xiang, L. Li, J. Zhang, X. Tan, H. Cui, J. Shi, Y. Hu, L. Chen, C. Su and S. L. James, J. Mater. Chem., 2012, 22, 1862 DOI: 10.1039/C1JM14618A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements