Issue 4, 2012

Visible light activity of Ag-loaded and guanidine nitrate-doped nano-TiO2: degradation of dichlorophenol and antibacterial properties

Abstract

To utilize visible light, Ag loaded and C, N-doped nano-TiO2 was prepared using a “one pot” synthesis utilizing mild reaction conditions and benign precursors. The synthesis was optimized using appropriate experiment design that took the silver content and calcination temperature into account. The optimized nanocatalyst was characterized by XRD, BET, TEM, TGA, XPS as well as UV-DRS. Nanocatalysts were predominantly anatase as confirmed by XRD, thermally stable up to 1100 °C, as revealed by TGA studies and exhibited absorption in the visible light region as verified by UV-DRS analysis. Moreover, XPS results proved that Ag was dispersed on the surface of the TiO2 nanoparticles and nitrogen, as well as carbon from guanidine nitrate was interlaced into the matrix of TiO2. Co-doping of TiO2 suppressed charge recombination and improved the visible light photo-activity up to the complete degradation of dichlorophenol (DCP) in 4 h of the reaction. Degradation followed first order reaction kinetics with kapp ranging from 1.1 to as high as 15.1 × 10−3 min−1 depending on the silver content and calcination temperature. Demineralization of the solution in terms of TOC was up to 92%. A complete elimination of Vibrio fischeri was accomplished with 1 mg L−1 of the nanocatalyst regardless of the Ag content.

Graphical abstract: Visible light activity of Ag-loaded and guanidine nitrate-doped nano-TiO2: degradation of dichlorophenol and antibacterial properties

Article information

Article type
Paper
Submitted
31 Oct 2011
Accepted
06 Nov 2011
First published
20 Dec 2011

RSC Adv., 2012,2, 1533-1539

Visible light activity of Ag-loaded and guanidine nitrate-doped nano-TiO2: degradation of dichlorophenol and antibacterial properties

J. Virkutyte and R. S. Varma, RSC Adv., 2012, 2, 1533 DOI: 10.1039/C1RA00990G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements