Issue 13, 2011

Physically crosslinked poly(vinyl alcohol) hydrogels with magnetic field controlled modulus

Abstract

Physically cross-linked isotropic and anisotropic poly(vinyl alcohol) (PVA) hydrogels containing micron-sized carbonyl iron particles were prepared through a cyclic freezing–thawing process. The PVA hydrogel can respond to a magnetic field and shows a magnetorheological (MR) effect, i.e., the modulus of the PVA hydrogel can be adjusted under a magnetic field. The chain-like structures of carbonyl iron are formed in the PVA hydrogel after orientation under a magnetic field of 1.5 T. Also some magnetic field induced oriented pores with a tunable diameter are observed in the dried PVA gel. The MR effect can be adjusted by changing the carbonyl iron content, the initial concentration of PVA solution and test frequency. The formation of aligned chain-like structures of carbonyl iron in the anisotropic PVA MR hydrogel improves the compression properties and the MR effect. At a carbonyl iron content of 70 wt%, the maximum absolute and relative MR effect of anisotropic PVA MR hydrogels are ∼1.24 MPa and ∼230%, respectively. The PVA hydrogels with good MR effects and moderate mechanical strength have potential applications in artificial muscle, soft actuators and drug release.

Graphical abstract: Physically crosslinked poly(vinyl alcohol) hydrogels with magnetic field controlled modulus

Article information

Article type
Paper
Submitted
05 Mar 2011
Accepted
13 Apr 2011
First published
26 May 2011

Soft Matter, 2011,7, 6205-6212

Physically crosslinked poly(vinyl alcohol) hydrogels with magnetic field controlled modulus

J. Wu, X. Gong, Y. Fan and H. Xia, Soft Matter, 2011, 7, 6205 DOI: 10.1039/C1SM05386H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements