Issue 5, 2013

Application of a micro-droplet generator for an ICP-sector field mass spectrometer – optimization and analytical characterization

Abstract

A micro-droplet generator (μDG) sample introduction system was coupled to a sector field ICP-MS instrument to investigate the analytical figures of merit with respect to single cell analysis. The sector field instrument was operated for the first time in a fast scanning mode (E-scan) with the shortest time resolution of 100 μs to measure the single droplet time resolved and using the original detector in a pulse counting mode without modification of the existing electronics. For reduction of the droplet diameter a triple pulse mode of the droplet generator was applied and a droplet diameter down to 23 μm has been achieved for this investigation with a 100% transport efficiency of droplets. Signal duration times of single droplets of less than 500 μs have been measured. Overall detection efficiencies in the range of 10−3 counts per atom have been achieved and absolute limits of detection range between 120 ag for Fe and 1.1 ag for Mg as a mean value from 1000 droplet events.

Graphical abstract: Application of a micro-droplet generator for an ICP-sector field mass spectrometer – optimization and analytical characterization

Article information

Article type
Paper
Submitted
17 Jul 2012
Accepted
06 Dec 2012
First published
04 Jan 2013

J. Anal. At. Spectrom., 2013,28, 646-656

Application of a micro-droplet generator for an ICP-sector field mass spectrometer – optimization and analytical characterization

K. Shigeta, H. Traub, U. Panne, A. Okino, L. Rottmann and N. Jakubowski, J. Anal. At. Spectrom., 2013, 28, 646 DOI: 10.1039/C2JA30207A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements