Issue 12, 2012

High performance and high stability low temperature aqueous solution-derived Li–Zr co-doped ZnO thin film transistors

Abstract

Highly stable and high performance solution-processed amorphous oxide semiconductor thin film transistors (TFTs) were produced using a Li and Zr co-doped ZnO-based aqueous solution. Li and Zr co-doping at the appropriate amounts enhanced the oxide film quality in terms of enhanced oxygen bonding and reduced defect sites. The 0.5 mol% Li and 1.0 mol% Zr co-doped ZnO TFTs annealed at 320 °C exhibited noticeably lower threshold voltage shifts of 3.54 V under positive bias stress and −2.07 V under negative bias temperature stress than the non-doped ZnO TFTs. The transistors revealed a good device mobility performance of 5.39 cm2 V−1 s−1 and an on/off current ratio of 108 when annealed at 320 °C, compared to a mobility performance of 2.86 cm2 V−1 s−1 and an on/off current ratio of ∼107 when annealed at 270 °C. Our results suggest that Li and Zr co-doping can be a useful technique to produce more reliable and low temperature solution-processed oxide semiconductor TFTs.

Graphical abstract: High performance and high stability low temperature aqueous solution-derived Li–Zr co-doped ZnO thin film transistors

Supplementary files

Article information

Article type
Paper
Submitted
29 Oct 2011
Accepted
04 Jan 2012
First published
07 Feb 2012

J. Mater. Chem., 2012,22, 5390-5397

High performance and high stability low temperature aqueous solution-derived Li–Zr co-doped ZnO thin film transistors

Y. Jung, W. Yang, C. Y. Koo, K. Song and J. Moon, J. Mater. Chem., 2012, 22, 5390 DOI: 10.1039/C2JM15526E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements