Issue 32, 2012

Preparation of TiO2 loaded with crystalline nano Ag by a one-step low-temperature hydrothermal method

Abstract

TiO2 loaded with crystalline nano silver (c-Ag/TiO2) was successfully synthesized by a one-step low-temperature hydrothermal method in aqueous solution using tetra-n-butyl titanate and AgNO3 as precursors. The structure and morphology were characterized by Auger electron spectroscopy (AES), X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), UV-Vis absorption spectra (UV-Vis) and fluorescence spectra (FS). The photocatalytic activity was tested with photocatalytic degradation of hydrogen sulfide (H2S) gas. The results show that the nano silver particles of Ag/TiO2 prepared by the one-step low-temperature hydrothermal method are crystalline, while they are amorphous when prepared by the conventional UV reduction deposition method (a-Ag/TiO2). The photocatalytic activity of the c-Ag/TiO2 prepared by the hydrothermal method was found to have a significant improvement for H2S degradation, being more than 2 times over that of the a-Ag/TiO2 prepared by the conventional method.

Graphical abstract: Preparation of TiO2 loaded with crystalline nano Ag by a one-step low-temperature hydrothermal method

Article information

Article type
Paper
Submitted
29 Nov 2011
Accepted
12 Jun 2012
First published
10 Jul 2012

J. Mater. Chem., 2012,22, 16306-16311

Preparation of TiO2 loaded with crystalline nano Ag by a one-step low-temperature hydrothermal method

D. Wang, Z. Zhou, H. Yang, K. Shen, Y. Huang and S. Shen, J. Mater. Chem., 2012, 22, 16306 DOI: 10.1039/C2JM16217B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements