Issue 24, 2012

Electrochemical supercapacitors based on a novel graphene/conjugated polymer composite system

Abstract

An efficient method for the preparation of a highly conducting hybrid material from graphene oxide nanosheets (GNS) and a novel conjugated polymer, poly(3,4-propylenedioxythiophene), is demonstrated. A functionalized monomer based on 3,4-propylenedioxythiophene, namely ProDOT–OH, was covalently functionalized with GNS, followed by oxidative polymerization to prepare GNS-f-PProDOT composites. The covalent functionalization process of GNS with the monomer ProDOT–OH was activated through the simple esterification reaction between the acyl chloride derivative on the nanosheets and the pendant hydroxyl group present in the monomer. Furthermore, the monomer functionalized GNS were co-polymerized with thiophene resulting in hybrid graphene nanostructures coated with highly conducting co-polymers with a room temperature electrical conductivity as high as 22.5 S cm−1. The resulting hybrid materials were characterized using a range of analytical techniques. The specific capacitance value of the composite and the co-polymer hybrids at a scan rate of 10 mV s−1 has been determined to be 158 and 201 F g−1 respectively and hence particularly promising for supercapacitors.

Graphical abstract: Electrochemical supercapacitors based on a novel graphene/conjugated polymer composite system

Supplementary files

Article information

Article type
Paper
Submitted
06 Feb 2012
Accepted
08 Apr 2012
First published
13 Apr 2012

J. Mater. Chem., 2012,22, 12268-12274

Electrochemical supercapacitors based on a novel graphene/conjugated polymer composite system

N. A. Kumar, H. J. Choi, A. Bund, J. Baek and Y. T. Jeong, J. Mater. Chem., 2012, 22, 12268 DOI: 10.1039/C2JM30701D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements