Issue 41, 2012

Simultaneous reduction and surface functionalization of graphene oxide with POSS for reducing fire hazards in epoxy composites

Abstract

Simultaneous reduction and surface functionalization of graphene oxide (GO) was realized by simple refluxing of GO with octa-aminophenyl polyhedral oligomeric silsesquioxanes (OapPOSS) without the use of any reducing agents. The presence of OapPOSS made the hydrophilic GO hydrophobic, as evidenced by the good dispersion of the OapPOSS-reduced GO (OapPOSS-rGO) in tetrahydrofuran solvent. The structure of OapPOSS-rGO was confirmed by XPS, FTIR and TEM. A morphological study showed that, due to the good interfacial interaction between the functionalized graphene and epoxy, OapPOSS-rGO was dispersed well in the matrix. With the incorporation of 2.0 wt% of OapPOSS-rGO, the onset thermal degradation temperature of the epoxy composite was significantly increased by 43 °C. Moreover, the peak heat release rate, total heat release and CO production rate values of OapPOSS-rGO/EP were significantly reduced by 49%, 37% and 58%, respectively, compared to those of neat epoxy. This dramatically reduced fire hazards was mainly attributed to the synergestic effect of OapPOSS-rGO: the adsorption and barrier effect of reduced graphene oxide inhibited the heat and gas release and promoted the formation of graphitized carbons, while OapPOSS improved the thermal oxidative resistance of the char layer.

Graphical abstract: Simultaneous reduction and surface functionalization of graphene oxide with POSS for reducing fire hazards in epoxy composites

Article information

Article type
Paper
Submitted
14 Aug 2012
Accepted
04 Sep 2012
First published
05 Sep 2012

J. Mater. Chem., 2012,22, 22037-22043

Simultaneous reduction and surface functionalization of graphene oxide with POSS for reducing fire hazards in epoxy composites

X. Wang, L. Song, H. Yang, W. Xing, B. Kandola and Y. Hu, J. Mater. Chem., 2012, 22, 22037 DOI: 10.1039/C2JM35479A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements