Issue 21, 2012

Systematic characterization of feature dimensions and closing pressures for microfluidic valves produced via photoresist reflow

Abstract

Multilayer soft lithography (MSL) provides a convenient and low-cost method for fabricating poly(dimethyl siloxane) (PDMS) microfluidic devices with on-chip valves for automated and precise control of fluid flow. MSL casting molds for flow channels typically incorporate small patches of rounded positive photoresist at valve locations to achieve the rounded cross-sectional profile required for these valves to function properly. Despite the importance of these rounded features for device performance, a comprehensive characterization of how the rounding process affects feature dimensions and closing pressures has been lacking. Here, we measure valve dimensions both before and after rounding and closing pressures for 120 different valve widths and lengths at post-rounding heights between 15 and 84 μm, for a total of 1200 different geometries spanning a wide range of useful sizes. We find that valve height and width after rounding depend strongly on valve aspect ratios, with these effects becoming more pronounced for taller and narrower features. Based on the measured data, we provide a simple fitted model and an online tool for estimating the pre-rounding dimensions needed to achieve desired post-rounding dimensions. We also find that valve closing pressures are well explained by modelling valve membranes in a manner analogous to a suspension bridge, shedding new light on device physics and providing a practical model for estimating closing pressures during device design.

Graphical abstract: Systematic characterization of feature dimensions and closing pressures for microfluidic valves produced via photoresist reflow

Supplementary files

Article information

Article type
Paper
Submitted
27 Apr 2012
Accepted
09 Jul 2012
First published
11 Jul 2012

Lab Chip, 2012,12, 4287-4295

Systematic characterization of feature dimensions and closing pressures for microfluidic valves produced via photoresist reflow

P. M. Fordyce, C. A. Diaz-Botia, J. L. DeRisi and R. Gomez-Sjoberg, Lab Chip, 2012, 12, 4287 DOI: 10.1039/C2LC40414A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements