Issue 21, 2012

Stable fluorinated sulfonated poly(arylene ether) membranes for vanadium redox flow batteries

Abstract

Partially fluorinated sulfonated poly(arylene ether) (SFPAE) copolymers were investigated as chemically stable proton exchange membranes for application in vanadium redox flow batteries (VRFB). The membranes' proton conductivity and vanadium ion permeability were quantified and correlated to other membrane properties such as water uptake and tensile modulus to provide insight into the tradeoffs in the design of new membranes for flow battery applications. The SFPAE-1.8 sample with optimized proton conductivity to vanadium permeability selectivity was selected for evaluation in a VRFB device and compared to the performance of a cell with a NAFION® N212 membrane. The VRFB cell with a SFPAE-1.8 membrane had higher coulombic efficiency, voltage efficiency, and energy efficiency compared to a VRFB with a N212 membrane under all tested current densities. The capacity fade of a VRFB with the SFPAE-1.8 membrane was 1.1 mA h per cycle, which was about 7 times lower than the fade experienced for a VRFB with a N212 membrane. The performance characteristics of the device could be correlated directly to the membrane properties and this work demonstrates our progress towards high-performance, low-cost, long-lifetime ion exchange membranes for electrochemical energy storage devices.

Graphical abstract: Stable fluorinated sulfonated poly(arylene ether) membranes for vanadium redox flow batteries

Supplementary files

Article information

Article type
Paper
Submitted
02 May 2012
Accepted
09 May 2012
First published
03 Aug 2012

RSC Adv., 2012,2, 8087-8094

Stable fluorinated sulfonated poly(arylene ether) membranes for vanadium redox flow batteries

D. Chen, S. Kim, L. Li, G. Yang and M. A. Hickner, RSC Adv., 2012, 2, 8087 DOI: 10.1039/C2RA20834B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements