Issue 29, 2012

Improved recovery of ionic liquids from contaminated aqueous streams using aluminium-based salts

Abstract

The number of applications involving ionic liquids has dramatically increased in the past few years, and their production and use in a large scale will inevitably lead to their dispersion into water streams (either by wastewater disposal or accidental leakage). Studies on the removal and recovery of ionic liquids from wastewater streams are therefore of crucial importance, yet particularly scarce. In this work, the use of aluminium salts is proposed to concentrate and remove ionic liquids from aqueous solutions. Two aluminium-based salts (Al2(SO4)3 and AlK(SO4)2·12H2O) were used to treat various aqueous solutions of ionic liquids containing imidazolium-, pyridinium- and phosphonium-based fluids. The gathered results show the enhanced ability of these salts to remove and recover ionic liquids from aqueous media. The minimum recovery efficiency achieved was 96%, whereas for a large array of systems recoveries of circa 100% of ionic liquid were attained. The residual concentrations of ionic liquids in water range from 0.01 to 6 wt%. The results reported disclose a novel promising technique for the recovery and treatment of aqueous effluents contaminated with ionic liquids by using salts commonly employed in water treatment processes, allowing thus its easy scale-up and adaptation to new processes involving ionic liquids.

Graphical abstract: Improved recovery of ionic liquids from contaminated aqueous streams using aluminium-based salts

Supplementary files

Article information

Article type
Paper
Submitted
24 Jul 2012
Accepted
11 Sep 2012
First published
12 Sep 2012

RSC Adv., 2012,2, 10882-10890

Improved recovery of ionic liquids from contaminated aqueous streams using aluminium-based salts

C. M. S. S. Neves, M. G. Freire and J. A. P. Coutinho, RSC Adv., 2012, 2, 10882 DOI: 10.1039/C2RA21535G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements