Issue 23, 2013

A modified persimmon powder sorbent for selective separation and determination of trace gold in geological samples by ICP-MS

Abstract

A novel method that uses chemically modified persimmon powder for solid extraction of Au prior to the determination by inductively coupled plasma-mass spectrometry (ICP-MS) was investigated. Experimental conditions such as acid concentration, sample flow rate and volume, eluent conditions and interfering ions were carefully examined. Gold can be quantitatively adsorbed on the new sorbent from solution of 3% (v/v) aqua regia, and then the trace gold adsorbed on the microcolumn can be effectively eluted with a mixture of 2.0% thiourea and 0.12 mol L−1 HCl. The transition- and heavy-metal ions did not interfere with either the separation/preconcentration or the determination. The maximum adsorption capacity of the sorbent was 25.3 mg g−1. Under optimal conditions, the detection limit for gold was 1.32 ng L−1 in the geological sample, and the relative standard deviation was 0.83% (n = 11) at 1.0 μg L−1. The proposed method was validated by analyzing three certified reference materials and applied to the preconcentration and determination of trace gold in geological samples with satisfactory results.

Graphical abstract: A modified persimmon powder sorbent for selective separation and determination of trace gold in geological samples by ICP-MS

Article information

Article type
Paper
Submitted
28 May 2013
Accepted
21 Sep 2013
First published
24 Sep 2013

Anal. Methods, 2013,5, 6774-6780

A modified persimmon powder sorbent for selective separation and determination of trace gold in geological samples by ICP-MS

J. Liu, D. Zou, X. Yang, X. Cheng and Q. Chen, Anal. Methods, 2013, 5, 6774 DOI: 10.1039/C3AY40897C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements